Guide to Flash stock Android Motorola Droid RAZR M XT907.

Flash Motorola Droid RAZR M XT907. On this post we will show to you how to flash Stock on Motorola Droid RAZR M XT907 Android device. On Android you can install one of many modified version of Android called ROMs to your Android devices. with installing a new ROM on your Motorola device, you will bring the latest version of firmware before your android manufactures does. Flashing your Motorola Droid RAZR M XT907 Android device can take your existing version and get the awesom new features of Android operating system. Beside that benefit, you can flash your Motorola Android device to fix bootloop or bricked device with installing a new ROM to this device.

You must do a little thing before perform install a new ROM on your&n bsp;Motorola Droid RAZR M XT907 Android device, If your Motorola device is in normal condition, you must Unlock your bootloader and flash custom recovery. To flash or install a new firmware you dont need to root your Motorola device, but usually custom ROMs come with  root access. 

When you unlocking bootloader on your Motorola Droid RAZR M XT907 device it will wipe your data stored on the memory, so you must backup all data to the computer before perform it. You can use the other method to backup your Your System, Apps, and Data. for more instruction how to backup data on your Android device, you can see this guide.

Make sure your device is Motorola Droid RAZR M XT907 to follow this instruction guide. On this guide you must read carefully and fully understanding all step below, or it can possibly brick your Motorola Droid RAZR M XT907 phone. Do it with your own risk, and We cannot be held liable for any damages caused by following this guide.

Preparing Flash Motorola Device.

1. Make sure to always backup your Motorola Droid RAZR M XT907 data to avoid lost them.
2. Be aware, that after flash your Motorola device, you can not downgrade your firmware version.
3. We recommended to stick with the same firmware branch that is already on your Motorola phone
4. Your Motorola Droid RAZR M XT907 must fully charged, at least you must have 80% battery capacity.
5. You must have USB 2.0 cable to connect your Motorola device to computer.

Download Tools.

1. You must download the latest Motorola USB & Charging Drivers from here
2. Download the latest available RSD Lite software, it has 6 MB of file size. Here
3. Download firmware for Motorola Droid RAZR M XT907, below:

(adsbygoogle = window.adsbygoogle || []).push({});
1.  VZW_XT907_4.4.2-KDA20.62-15.1_1FF.xml
• Here

Guide to Flash Motorola Android phone.

1. When step above is done.
2. Now, connect your Motorola Droid RAZR M XT907 device to your personal computer.
3. Make sure the computer can detect the phone in fastboot mode.
4. If you got any problem, you can try to connect your phone to the other computer, some times it has a different method for any different version of windows operating system.
5. How to boot Motorola device to fastboot mode ?


• Power off the phone, by hold and press power button for a seconds, it will completly turn off the device.
• Now, press and hold both volume down + volume up button.
• While pressing both volume button, press and hold power button for a seconds.
• Release all button when you see fastboot on your screen.

  

  motorola fastboot mode

6. Then, connect the USB cable to the computer, you should see your computer detect and install a driver.
7. Now, Got to device manager on your computer, you must see Mot Single ADB Interface under ADB Interface.

   

   Mot Single ADB Interface

8. If Mot Single ADB Interface not listed, you can force  the drivers to look in the "C:Program FilesCommon FilesMotorola SharedMobile DriversDrivers" folder. 
9. Once all driver is loaded, now open RSD Lite and the internal codename should be listed under one of the ports, it says Fastboot VANQUISH_U S. 

   

   RSD Lite

10. Now, connect your Motorola Droid RAZR M XT907 device to computer using USB cable.< /tbody>

    

    rsd lite for flash motorola device

11. Now, click the button on red circle with the no. 1 mark to browse to the firmware file with .zip extension and select it.
12. Finally, click the Start button (red circle with no. 2 mark) to initiate firmware installation.
13. Just wait the firmware installation process until finish, It might take a few minutes.
14. When the installation is finished, you must reboot your Motorola Droid RAZR M XT907.