How To Make a Bootable Flash Drive - A Pen drive bootable flash drive helps you to install the software or operating system without a disk drive. that means if you do not have a disk drive and want to install the operating system or anything else on your computer, then you must create a bootable flash drive to install software on your computer without using a disk drive. guess if your computer drive is damaged and you do not have an operating system on your computer. then the only way to install a new window on your computer is to create a bootable flash drive and install your window directly from a flash drive. so here I will guide you step by step on how to create a bootable flash drive. You just need to follow the steps.
Step 1: Insert your pen drive in the USB port of your computer and go to my. right click on the drive and click on the pen drive format.
Step 2: Select the check NTFS and quick format. pressing the format and format the flash drive.
Step 3: Go to start >> run, type "cmd" and click "enter". After this you will see the command prompt.
Step 4: Type "broken" and click "enter". The "diskpart" screen will open.
Step 5: Type "listdisk" and press "enter". In the disk drive is listed, you need to find a flash drive. You will be able to recognize its size. For example, if the name is "disk 1" then you must enter "select disk 1" and click "enter".
Step 6: Type "clean" and press "enter". This will clean up your pen dri ve. This will clear all data from your flash drive.
Step 7: Now make the partition. Type "create partition primary" and press "Enter." Then type "select partition 1" and press "Enter." Now type "active" and press "Enter."
Step 8: You are almost done. Now flash drive is bootable.
copy all the setup files (not just copy the main folder. You need to copy all the files in that folder) and paste the files on your flash drive to install the files directly from the pen drive when your computer boots. Do not forget to change the first bootable device to your flash drive with the BIOS settings to install something when you boot your computer.
Step 2: Select the check NTFS and quick format. pressing the format and format the flash drive.
Step 3: Go to start >> run, type "cmd" and click "enter". After this you will see the command prompt.
Step 4: Type "broken" and click "enter". The "diskpart" screen will open.
Step 5: Type "listdisk" and press "enter". In the disk drive is listed, you need to find a flash drive. You will be able to recognize its size. For example, if the name is "disk 1" then you must enter "select disk 1" and click "enter".
Step 6: Type "clean" and press "enter". This will clean up your pen dri ve. This will clear all data from your flash drive.
Step 7: Now make the partition. Type "create partition primary" and press "Enter." Then type "select partition 1" and press "Enter." Now type "active" and press "Enter."
Step 8: You are almost done. Now flash drive is bootable.
copy all the setup files (not just copy the main folder. You need to copy all the files in that folder) and paste the files on your flash drive to install the files directly from the pen drive when your computer boots. Do not forget to change the first bootable device to your flash drive with the BIOS settings to install something when you boot your computer.
No comments:
Post a Comment